The Event Lighting range of architectural lighting equipment has recently expanded with the addition of the DOWN9RGB.

This unit features a 9W RGB LED, 24° beam angle, 20° tilt angle, 90-100mm hole cut out size, 1m tails and DMX directly in with 3 channel control through the in-line DMX driver.

The key advantage with this unit is that it works in conjunction with the following existing models:

IPSPOT Series - Certain models stocked in 30 degree beam angle - Additional models available to order

IPBAR Series - Certain models stocked in 30 degree beam angle - Additional models available to order

PIXBALLS2 Series - Stocked in 5m strings - Models with black cable available to order upon request

All of these units are addressed through the ARCW which is a programmer/4 universe controller via included software.

The system shares the same accessories (cables beginning with 'IP2') and work seamlessly through the same power supply system which is a 150W IP rated unit (IP2PSU150).

To set the address, a particular model must be plugged in solo or sequence (up to 1 universe at a time) and the programmer will address with suitable intervals.

If multiple addresses are on the same job, they will need to be addressed separately but all units remember their addressing.

If you want all items to work off the same address, they will need to be done individually. 

By investing in the models mentioned above, you will gain further knowledge and be able to transition installations to using the same platform for a variety of effects.

Not only is the range expanding, the pricing is very competitive and backed with our 3 year warranty.